X[gravityform id="1" title="true" description="true" ajax="true"]

Home Security Alarm Systems in Melbourne

Endeavour Locksmiths and Electronic Security installs only the most advanced, yet simple to operate burglar alarm systems & security alarm systems available for residential and commercial applications in Melbourne.

Burglar Alarms MelbourneThe following security alarm systems and detection components, which we use and recommend, have demonstrated proven reliability and performance.

  • Bosch Security Systems – Solution Series Alarm Systems
  • Bosch Security Systems – Passive Infra-red Detectors.
  • Tecom – Challenger Series Alarm Systems
  • Direct Alarm Supplies (Hills Australia) – NX Series
  • Optex Passive Infra-red Detectors.

Endeavour Locksmith and Electronic Security uses its own licenced security technicians and installers – for security and quality control reasons we do not use sub-contractors and we are well known for our installation & service of home security systems in Melbourne.

Security Alarm Systems Functions

Most burglar alarm systems use a number of infra-red motion sensors to detect unauthorized entry. Other sensors such as magnetic reed door and window sensors, glass-break and vibration sensors can also be used. The sensors can be directly wired to the security alarm controller or connected by wireless where a wired installation is not practical. One or more code-pads are used to arm, disarm and control other functions of the security alarm system. Modern alarm systems especially burglar alarms & wireless alarm systems are very easy to operate. When the security system is ‘armed’, loud sirens located inside and outside of the protected building will sound for three minutes if one of the intrusion detectors is activated. They will sound again if the system determines that an intruder is still in the building. A flashing strobe light mounted near the external siren also provides an indication that unauthorized entry has occurred.

It may not seem important, but strategically placed stickers warning that a sophisticated security alarm system is in use provide a first line of deterrence and defence against intruders. These are normally provided or placed by the company that installs your burglar alarm system.

The security system has a built-in time delay so that you can leave and re-enter while the system is armed. It is also possible to arm just the perimeter sensors (if installed) and leave the internal movement sensors deactivated to allow free movement within the building or home while still protecting doors and windows against unauthorized entry.

In addition to the audible alarms, the security alarm controller’s built-in communicator can immediately report alarm conditions to an alarm monitoring station which is manned 24 hours a day and ready to take action according to your instructions. Alarm monitoring costs a little over a dollar a day. Alternatively, for the cost of a telephone call, the communicator can call your mobile phone to alert you of an alarm condition. You can then decide what you want to do about the alarm.

Commercial premises can employ a range of devices to be used in the event of a hold-up. Your alarm monitoring station will immediately alert police if it receives a silent alarm from one of these devices.

All security alarm functions are protected by a back-up power system to ensure that your security system continues to function in the event that the mains power is cut or if there is a power failure.

In addition to the basic intruder alarm functions, security systems can also provide a range of optional functions such as:

  • Panic, duress or medical alert alarms,
  • Smoke and fire detection,
  • Operation by a 2 or 4 button keychain remote.

Some systems enable you to control electronic door locks, lighting systems and watering systems and other similar systems. As an option, you can even control your security alarm functions over the phone which can be useful if you are away from home, say on holidays.

Burglar Alarm System Components

Code Pad

One or more codepads are attached to the security system to enable you to arm and disarm the system and to control other alarm system functions. They are not difficult to use. For convenience and ease of use, a codepad is normally located adjacent to the main entry and exit door. Manufacturers have designed their codepads to harmonize with most home and office decors and yet have ensured that the touch-pad keys and LED displays are easy to read. Most codepads provide both visual and audible indication of data entry and other system events.

Security Alarm Controller

The alarm controller is the ‘brains’, of the security system and is normally enclosed in a strong steel enclosure. The controller needs to be centrally located in an out-­of-­sight location within the building or home -­ for example, under the stairs, in a wardrobe, or in the air vent above the refrigerator. A power point is required near the unit. Unless wireless connectivity is used, the alarm controller is connected by wire to each of the sensors, the codepad(s), and the audible alarms. A telephone extension is also installed if the system is to be connected to an alarm monitoring station or if it is to alert the system owner via a mobile phone. The back-­up power system is usually installed within the controller’s steel enclosure -­ the system will warn you when the rechargeable battery needs to be replaced.

boch_img

Sensors

Even though they are small and reasonably unobtrusive, the movement sensors are generally the most obvious indication that a business or home security alarm system is installed. Depending on your circumstances, your alarm installer may recommend particular types of sensors. For example, sensors are available that will cope with harsh environments, others will allow a pet to be loose in the house without setting off the alarm, while others can be installed which just disappear into the decor. Some are available that just look like the downlights that we see in many modern homes. The choice is yours.

Home Security Alarm Systems

Audible Alarms

The object of an alarm system is to detect and defend against unauthorized entry and nothing is more likely to drive off a would-be thief than the ear-piercing scream of the internal alarm and the familiar sound of the siren going off outside the house. Not only does it tell the intruder that he has been detected but it also lets him know that security officers or the police may be on their way having been called by the alarm monitoring station. Chances are that he will leave before stealing anything or doing significant damage to your property

The Brands We Trust

  • slide
  • slide
  • slide
  • slide

PROUD OF OUR YEARS OF EXPERIENCE

The high standard of the work that we do, the quality of the products we use and the unsurpassed service we provide

For all your home, business and automotive security needs contact Endeavour Locksmiths

Call Us on : 03 9796 5651 or

Email service@endeavourlocksmiths.com.au

js_loader
js_loader